DT - "Dodge This"
3.02 - (rating 1992)
Will it break the 2K barrier? (3.02 fixes bug in 3.01 where full power bullets were not fired when enemy was close).
2.91 - (rating 1993)
A couple of tweaks here and there.
2.81 - (rating 1970)
Moves mainly on enemy bullet fire - opponents that fire waves on every tick will be at an disadvantage. If in challenge/reference mode and enemy moves or fires incorrrectly reverts back to normal mode.
2.71 - (rating 1995 (at best))
Added a couple of anti movement adaption guns to make life a bit more difficult. Also created separate entry for Melee competition - but no change to melee release. New team entry also created (also no change) but should sort out a long standing memory leak problem.
2.61 - (rating 1992)
Fix memory issues and improved movement against weak targeters (at the expense of good targeters).
2.51 - (rating 1970)
New Movement introduced for fine tune flatening in 1v1 - no change to the guns - that's for the next release :)
2.41 - (rating approx 1912)
The new movement introduced in version 2.21 is weak against some good guns - 2.41 hopes to merge the good elements of the movement in versions 2.11 and 2.21.
2.31 - (rating approx 1930)
Small change to keep a 'Crib Sheet' for targeting against opponents indefinatly - requires around 67 bytes per opponent.
2.22 - (rating approx 1912)
Bug Fix - DT 2.21 was in slow but accurate targeting mode (used for testing my movement).
2.21 - (rating approx 1910)
A new feature in the movement should make this version harder to hit. When Running under Java 1.4.2 I have ensured that the worst that can happen is that DT is disabled in round 1 only. No changes to targeting or melee in this update.
2.11 - (rating approx 1890)
I've had to improve targeting and movement to prevent people thinking I'm a soft touch - not tested as well as usual but should beat the present threat to the throne.
New adaptive movement - attempts to ensure enemy bots see a 'flat' movement profile for DT. Minor Bug fix in linear gun calculations - may make Melee and Team marginally better. A little more aggressive in that it will, on average, stay closer to the enemy.
Bug fix in gun - slightly better in longer battles against weaker bots. Additional gun (still statistical) Optimisation of movement Supports reference and challenge mode via properties file in data directory. For movement challenge in RoboWiki (reference = stationary fires 3.0 bullets, challenge = moves but does not fire).
Slight tweak of gun - selection of best gun sould be achieved more efficiently
1v1 movement replaced - after noteing some 1v1 bots had better movement I replaced my 1v1 movement so that it is no worse than any other bot at any distance according to DT's guns. Watch how DT turns just in time to miss the walls (it took ages to get this to work).
All new melee movement - no AG and no corner movement. This has not yet been tweeked so expect futer improvements.
Team: Old movement, may look at this if anyone beats DTTeam.
Graphs generated from FloodMini's saved data (a hobby of mine lately) don't show quite as pretty of a curve in some places (particularly close up), but version 1.81 has clearly the best profile when approaching a wall of any bot I have graphed. The no-fear-curving-with-the-wall mentality was worth it, and just ahead of FloodMini 1.2, which took advantage of the weakness so many bots have in this segment. -- Kawigi
If you have any results please post them below (even if it is not your bot) percentage score should be calculated as your score/total score and wins as your firsts/total rounds.
|Robot_______________||Author___________||Score (% of total)____||Wins (% of rounds)___||Comment|
|WhatTheHeck||Kawigi||81.2||90.8||MicroBot, Extends Robot, I started beating DT when I was into Robocode for only 2 months. Now I'm trying to beat DT legitimately.|
|FloodHT 0.8||Kawigi||44.0||33.2||Dev version is about the same (maybe barely better)|
|DuelistMini 1.1||David Alves||38.6||21.2|
Aha, try and get us to tell you "Mine is the bot you need to test against!", eh? Clever. -- Kawigi
Check out Tron 2.01's properties file for a "legitimate" way to beat DT... ;) -- ABC
Hehe, Tron 1.5 has a "sandboxkiller" flag too, I use it to boost morale sometimes ;). I know I just need an excellent movement to beat DT, it's just that it's easier said than done... -- ABC
Shouldn't work against Marshmallow either. But this must sure mean that your gun is good. The mirroring is perfect, beautiful to watch. If you like I can send you my new movement when it's ready and you could try that against DT. Should be a movement that works good against most bots as well. Just holler my way if you would like to try. -- PEZ
At first I thought I was hallucinating when I saw it not moving at right angles :-p -- Kawigi
What it means for sure is that DT's movement is amazing, it can do what everybody else has been trying to do for ages, it can "Dodge This" :). I believe my gun is pretty good too, I'd be more than happy to try it with your movement PEZ, send it to email@example.com when it's ready. The Targeting challenge can probably tell me exactly how good it is, and I still have some ideas for improvements. Of course it is not Tron... I'm a stubborn guy, I won't give up easily on making a "Tron themed" kick ass bot! ;)
ABC I've just has a look at Tron 2.01 Sandbox killer - nice one. Don't get too excited however - I was assured that my development version of DT does not fail against Tron in the same way (I need to look at this - I don't know yet if it is it the gun bug I fixed or the new movement of DT or some other strange factor). In other words your gun may not be better - I will let you all know asap. -- Paul Evans
Update: It looks like DT looses against Tron's Sandbox killer due to movement - DT's movement had been optimised against other versions of DT. As a result DT find's it difficult to hit itself (or movement of itself) but the movement is sub-optimal against different bullet powers - so, by using different power bullets Tron gets a target it can hit. My development version od DT attempts to optimise against all bullets powers and does not fall into this trap.
M has an AntiMirrorGun in it's VG array in order to avoid others to take such easy advantage of its movement. Even if it's a crap anti mirror gun, it's not worth mirroring M. Interestingly this gun is Ms best guns at far ranges against some non-mirroring bots as well. DT is one of these bots actually. It's probably why M is one of DTs hardest foes (when M and DT has gotten some 500 rounds to get to know each other that is, with clean data files M is snack for DT). -- PEZ
So Paul, are you saying that DT's movement doesn't addapt to the enemy's bullet power at all or that it is unoptimised for Tron's particular bullet power choices? I also have a "mirrorBulletPower?" flag in Tron, but I never got around to fully implement it, maybe I'll try it one of this days. This of course only serves to exemplify the dangers of only optimising your movement against your own gun...
The new DT does take into account bullet power and distance - and does so better than DT1.91 - I think it's in the final stages of development - I'm just testing it against some key bots to see if I have made any mistakes.
oooh! oooh! Do I get to have any of those key bots this time? -- Kawigi
Sorry - not at the moment - my final test set of bots are Cigaret 1.17, DT 1.61, Marshmallow 1.4.4, GlowBlowAPM 1.0, DuelistMini 1.1. As you can see the list is fairly old - I've been using them since development of 1.71. I thought they needed an update (hence the question at the top of this section). -- Paul Evans
Just for fun DT 2.01 has been released :) (version 1.91 is still available for the movement challenge). DT 2.01 beats Tron in SandboxKiller? mode (without the aid of a anti mirror gun). ABC do you want to try reflecting bullet power as well as movement - your gun might just do it. -- Paul Evans
About CigarQwhgads?, I've emailed Iiley to ask if we should stick this one out in the wild. I would propose the name UltimateDeathToMegaBots?, but I doubt the name would last. And I haven't tested it against other significant MegaBots (like FloodHT or Chameleon or BlestPain) -- Kawigi
Sorry iiley I had not realised you were so close to beating DT - I would have released 2.01 faster if I had realised :-). BTW I like the performance of this bot - please don't add pattern matching. Nice victory dance. -- Paul Evans
The real difference here is that BlestPain just had the edge before, and now DT just has the edge. And for some reason the opposite has happened with this random MiniBot I need to polish up... -- Kawigi
Now to my questions/remark. I tried repeat Tron's success with using MirrorMovement against DT in GB. It didn't improve GB's performance against DT of course. But if you try pitting the two foes against each other you'll probably see something strange in the beginning of many battles. DT seems to get stuck against the vertical wall and/or corner for a very long time. Is this on purpose? It almost looks like DT have problems as long as you are pushed back up against a wall, but when DT then decides to fight a closer battle the problem isn't an issue any more. -- PEZ
DT's movement never gets itself in a position where it will hit a wall in normal play, or to put it another way it will start turning to avoid a wall just before it need's to even if going at full speed. Unfortunatly the start condition of a battle is not under DT's control and if placed near an edge DT estimates it is in a position to hit a wall - DT's emergency action is to set a very slow max speed until the wall hitting danger is passed (usually by being parallel to the wall) - as it occurs at the beginning of a round before firing commences I don't think there is a problem. - Paul Evans p.s Thanks for the tidy up.
But the thing is that from my observations many shots are exchanged before DT gets unstuck. The only thing saving DT here is that GB can't hit a target, stationary or not. Though it couldn't be a big problem this since DT is by far the king of the hill. =) -- PEZ
========================= Round 6 of 100 ========================= pe.SandboxDT 2.11: Exception: java.lang.ArrayIndexOutOfBoundsException java.lang.ArrayIndexOutOfBoundsException at pe.a.e.a(Unknown Source) at pe.a.b.a(Unknown Source) at pe.a.f.try(Unknown Source) at pe.a.f.else(Unknown Source) at pe.SandboxDT.run(Unknown Source) at robocode.peer.RobotPeer.run(RobotPeer.java:616) at java.lang.Thread.run(Thread.java:536) SYSTEM: pe.SandboxDT 2.11 wins the round. ========================= Round 7 of 100 ========================= pe.SandboxDT 2.11: Exception: java.lang.ArrayIndexOutOfBoundsException java.lang.ArrayIndexOutOfBoundsException at pe.a.e.a(Unknown Source) at pe.a.b.a(Unknown Source) at pe.a.f.try(Unknown Source) at pe.a.f.else(Unknown Source) at pe.SandboxDT.run(Unknown Source) at robocode.peer.RobotPeer.run(RobotPeer.java:616) at java.lang.Thread.run(Thread.java:536)
Wierd... Is anybody else getting this problem? -- Vuen
Lol, that's the most bizarre stack trace I've ever seen in my life. Of course, what do you expect from DT, and Paul's nasty habit of having a method called 'a' in a class called 'e' in a package called 'pe.a'... -- Kawigi
I'll try to find the problem - thanks for the information. DT also suffers from a file security problem running under Java 1.4.2_01 (I think all bots that do file i/o will, see the CompressedSerialization Page). In the mean time try deleteing DT's enemyStats file, it may corrupted. -- Paul Evans
...and Paul's nasty habit of having a method called 'a' in a class called 'e' in a package called 'pe.a'...I think Paul didn't realy wrote classes , methods and packages called 'a' 'b'.. . That just some kind of encryption. Paul doesnt't want others to read his code by decompiling it. --deathcon
I know, I just like to pick on his obfuscator. -- Kawigi
Hey Paul.Why don't you add a VictoryDance to SandboxDT?It would be nice to watch AND your bot wouldn't be hit from a bullet that was fires from the enemy just before he died.SandboxDT often get hit in such situations. --deathcon
I have no artistic flare, I'm sure any victory dance from me would be naff. I'm not so sure standing still after the enemy has died makes DT vulnarable - the enemy does not know when it is going to die - if it were to take advantage of the fact that DT goes stationary it would need to do head on targeting in situations where its energy is less than 16 - a side effect would be DT would probably increase it's likleyhood of not being in this position if the enemy took such an approach. --Paul
Bots that always fire head-on would get a few hits against you, as would very lucky other bots, it may give you 1 or 2 extra rating points, and as you aren't restricted in codesize, i would be inclined to do it. Try a 5 pointed star pattern, that might look nice, and fire outwards at each point, with a lower power each time, so you get a nice circle of bullets for a brief moment. -- Tango
Paul, as you can see here it is not unnormal that a bot fires head on head at you:
(GuessFactors anticlockwise/clockwise moving and both together)
and please ignore these bars at 0.5 and -0.5 - that if from default data
10 Jan 2004 : removed pics. You can see my new one below. --deathcon
Interesting graphs - when you add the clockwise and anticlocwise graphs why don't you swap the sign of the guess factor on one of the graphs so that positive guess factors occur when either the opponent was going clockwise at fire and the hit was clockwise from the head on point or the opponent was going anticlockwise at fire and the hit was anticlockwise from the head on value (negative guess factors would be when the opponent was moving in one direction at fire and the eventual hit was in the opposite direction). In this way you should not need two graphs - you could pool the data and learn twice as fast (the two graphs are basically mirror immages of each other).
So far as the peak at 0.0 is concerned I am a little sceptical - the peak looks very sharp which is not typical of DT's movement. However, it appears to have about the same density as the peaks at around +0.7 (+ve in direction of initial movement) and so would have the characteristics DT movement is designed (to be hit as often in the high guess factor range as the mid (0.0) guess factor range - so far DT only actively adapts the relative sizes of these two natural peaks in it's movement profile).
Yes, what Paul says about mirroring clockwise and anticlockwise is an important feature of guess factors. Take advantage of it. If you want to see an example how it is done in code I think a pretty straight-forward implementation could Aristocles. At least it is very little code to read. =) No segments or anything to blur the picture. -- PEZ
But if you are always mirroring clockwise and anticklockwise you wouldn't need two segments at all.Maybe it't a nice trick at the beginning of a battle. However i have tweaked my gun a little. Removed old pics and here are the new one: --deathcon
Exactly. You don't need a segment for clockwise / anticlockwise direction. That's the point. -- PEZ
Although there is a chance that some bots move differently when going clockwise as opposed to going anticlockwise. Probably due to bugs, rather than design. If you have DynamicSegmentation? it might be worth adding a direction segment, but it would reduce the number of hits on each GF too much (about 50%, obviously) in other bots. -- Tango
Any news on the upcoming version of DT? Are you working exclusively on 1on1 or will the new version have improved melee/teams strategy? Btw, I don't know if you are aware but DT crashes sometimes when the final duel of a melee battle starts, something to do with the onBulletHit? event. -- ABC
Hi ABC - glad you're thinking of me - DT 1v1 is being worked on at the moment - I've just spent a few days predicting where DT will be so that it can control it's movement and create a anti mirror gun. I have some positive results but I'd like to make a BIG return - watch this space. Paul
I will, got to watch my back now ;). Anyway, I was wondering if you are considering "artificial" ranking boosters, like pre-saved data, anti headOn/mirror movements, etc. I'm particularly worried about pre-saved data, since that would probably force me to develop my own gessFactor gun (I have some ideas but not much time). Alternatively I could start saving dodging data, that would maybe earn me some points in the rumble... Basicaly what I'm curious about is how serious you are on that 2000 points race. :) -- ABC
I guess Paul is more serious about it than most! =) You go watch your back good man. -- PEZ
Since you seldom get more than two battles against any bot presaved data gives a considerable advantage in the RR@H. I agree that anti-this-or-that-weakness are not artificial. Unless, of course, you are a supporter of PremierLeague rules. Which I am. But given the regular rules, any weak-bot-trashing is totally not artificial. -- PEZ
Agreed, I shouldn't have mentioned AntiHeadOn? and AntiMirror in the same phrase as pre-saved data, they are both very valid tactics that make a bot more complete. I would call them "easy ranking boosters" instead, since they rely on the fact that a lot of bots in the rumble use HeadOnTargeting and wouldn't be so effective in a ER style competition where you only fight close ranked bots. Nevertheless, they would surely affect something DT is still the king of: Specialization Index. -- ABC
No doubt about that. :) -- ABC
Paul, i was just testing your new 2.51, and got this:
========================= Round 1 of 35 ========================= Reading Data pe.SandboxDT 2.51: Throwable: java.lang.OutOfMemoryError java.lang.OutOfMemoryErrorIt's strange because it's the first time in my life that I see that kind of error (the vm running out of memory). Could it be something in the new DT? -- Axe
It's happening oftenly here. The memory alocated to the process goes +90Mb... An easy way to get it is trying a match DT 2.51 X DT 2.51. I'm running it in a WinXP, Athlon 1.7Ghz, 512Mb. Please let me know if the problem is here. -- Axe
Another DT 2.51 error:
Round 26 of 100 ========================= SYSTEM: Bonus for killing ms.Ares 0.19: 7 pe.SandboxDT 2.51: Exception: java.lang.NullPointerException java.lang.NullPointerException at pe.a.i.a(Unknown Source) at pe.SandboxDT.onHitByBullet?(Unknown Source) at robocode.peer.robot.EventManager?.onHitByBullet?(EventManager?.java:572) at robocode.peer.robot.EventManager?.processEvents(EventManager?.java:719) at robocode.peer.RobotPeer?.tick(RobotPeer?.java:1024) at robocode.AdvancedRobot.execute(AdvancedRobot.java:186) at pe.a.i.goto(Unknown Source) at pe.SandboxDT.run(Unknown Source) at robocode.peer.RobotPeer?.run(RobotPeer?.java:616) at java.lang.Thread.run(Thread.java:536)
This happened in about 30% of all battles. :-p --David Alves
Amazing! Even with these exceptions & errors, first and 1970+ scoring. Congrats, man! -- Axe
That error was in a melee battle, 1-v-1 I've only had out of memory errors, and those went away when I set -Xmx512M --David Alves
Yeah, I've had speed and memory issues with it too, grinds robocode to a screeching bloated halt. Very impressive release, though. -- Kuuran
Congrats! That new movement is great. But you must fix the memory leak. This DT hangs my RR@H client and you know what I do with bots doing that, right? I'll leave it in a few days since a king has certain privilegies. Amazing you could improve your movement this much! -- PEZ
I'm having memory problems when DT runs. It slows down RR@H to the absurd and finally it stops because it has no memory. -- Albert
Heh, I can't think of a reason that a movement algorithm would require that much memory! Congrats on getting back to #1 so quickly again! David and I had a bet going, and he won. :P -- nano
David knows how Paul works a little better than you, I suspect ;-) -- Kawigi
I'm looking at the memory leak now - hopefully I'll have a fix for it soon - as for speed I'll see what I can do - but I do expect it to be slow (if you want to see it run really slow (and beat shadow) try running with the hiseg gun option set in the properties file. -- Paul
If you found the memory hole you'd get rid of the gradual grind to a halt that is the biggest problem. Just generally slow execution isn't that big of a deal, it's the slowdown to a near standstill after some time that's an issue. -- Kuuran
Exciting with a DT 2.61! Do you have any prediction for it? -- PEZ
If it gets close to 2K I'll be pleased (I don't know because I did not test it well) - it should be top of the general 1v1 table - (the PL table won't be so good as I know it does not do well against PM's and good movers). -- Paul
Looks good so far, 1990 points! I tried "milking" the weak bots with Shadow 2.41, but must have done something wrong... Anyway, congrats, the crown is yours again. I won't be updating Shadow anytime soon, since I decided to do some major restructuring. -- ABC
Amazing movement. Impossible to hit! I feel frustrated. Although isn't it vulnerable to pattern matching? -- asm
Nice details sheet on DT 2.71 1-v-1!!! It's insane actually. This must surely be the strongest bot ever. -- PEZ
It seems to be struggling to reach the ranking of the last version... I'm sure it will get there, but it seems strangely slow to increase... -- Tango
It's early days yet - but I have concentrated on performance against the better bots, and hopfully not lost performance against the weaker bots - in the long term I think DT beats all bots (although DT vs Lacrimas is unstable - usually DT wins, but sometimes Lacrimas gets and keeps the upper hand). Hopefully the rating will break 2000 when DT starts fighting opponents it has already met). -- Paul
Best of luck! -- Tango
Do you think luck has anything to do with it? :) -- Paul
Of course it does. If you start off cornered in every single round, you don't really stand a chance, do you? As long as there is a random element, luck plays a part. Nevertheless, I have the greatest confidence that you will do it! :-) -- Tango
"Momentum = -23.400000000000006" That can't be good, can it? It's currently 10 points lower than the last version finished at... -- Tango
In the long run luck will have nothing to do with it. I think we will have to wait for DT to start meeting the same bots twice before we can see where it'll go. But, at least for DT 2.61 the saved data file grew too large. If 2.71 has the same problem this might get in the way. -- PEZ
I did not realise that 2.61's data overran - it should keep the enemystats.dat file to less than 190000 bytes - there should not be a problem unless there is another file other than the standard DT.properties file. PEZ can you give more information? -- Paul
Yes, that thing works, don't worry. I just mean it hit the 190K ceiling which must mean you can't fit all enemies in the file. I'm not sure how many you can fit though, so it might not be a problem. -- PEZ
Wow. Now DT doesn't have a single loss on its detail sheet! And looking at the LRP graph I strart to doubt I can make a bot that brings me the crown. It looks very balanced and the school of enemies are well contained. If one doesn't look close enough it looks like you don't collect those easy points from the head-on-targeters. There are no outliers up there like on Aristocles and other bots graphs. But looking closer you can see that it nails those bots with 99% and such. Which must mean you beat most other bots with the same relative ease. Incredible. Truly well done Paul. You really deserve that crown. -- PEZ
We've had problems with DT fighting older versions of itself, but now it's fought the current version of itself... that can't be right, can it? -- Tango
I bet it wins those fights too. =) -- PEZ
FYI DT can store full information on around 60 opponents and partial information on the rest (partial info at 70 bytes per opponent, full info at 3000 bytes). -- Paul
Ah, I'll have to remember that possibility. -- PEZ
Paul, I don't think that you want to hear it, but I'm still not able to run any team battles with your monster. I'm allway getting java.lang.OutOfMemoryError?. Is this my fault or is 256MB ram simply not enough. -- rozu
David said last night that he needed to set it to a GB of memory to run the team RR@H client, and that with DTTeam, it peaked at 950 MB of memory. -- Kawigi
Gets worse than that Kawigi... I left it running overnight and this is what happened:
That's the RR@H process on very bottom... Apparently a gigabyte of RAM isn't enough. I only have 1.5 GB, and I refuse to give it any more! >=( --David Alves
It's almost certainly my fault - I have not run a team round for many months now - presumably the more battles DT plays the grater the memory (memory leak) or is it like my last memory problem: the more bots in the enemyStats file the more massive the memory (lazy programming)? -- Paul
More bots would use more memory, that's unavoidable, the problem certainly increases with more battles, so it must be some leak (and one that remains after the match, as RR@H only runs 35 round matches, which it can certainly handle). I think there is a workaround, simply set the client not to iterate, and it will loop round using the batch file's loop, restarting java every time, so the leak is tidied up. It will run slower, but won't crash. -- Tango
He always is. Nobody's managed to beat DT for more than a few weeks. :-P --David Alves
And with a new Cigaret-style movement! Can't wait to see where it ends up. :) -- ABC
1965 after 147 battles with low momentum... 2.81 may actually be weaker than 2.71 --David Alves
wow 1975 rating or so with momentum of over 300!--andrew
Don't get too excited, its rating won't start stabilizing until at least 100 battles are in and we're only at 29. (1943/+260)
I'm glad you are all watching :) -- Paul
1997 with 73 battles, looking good! :) -- ABC
The heat is on (3.01). I'll start my client again. -- PEZ
It seems to be struggling against simple bots of the low-rated micro and nano variety (Kakuru, Aurora, etc). As David has pointed out, those are going to bring you down fast. -- Kuuran
Expected % vs Aurora is about 80%, and he's only underperforming by 3.7%. It's not enough to be a problem. I was refering more to the extremely low ranked bots, say 1400 and below. Case in point: a bug caused YALT 1.0 to crash sometimes vs. 3 bots, all ranked 1350 or below. Since I was getting about 60% instead of the predicted 90+%, my rating vs. those three bots was a good 400+ points lower. Even when diluted by the results from all the other bots, it was dragging my score down. Fixing the bug, with no other changes, was worth 27 rating points. A good rule of thumb is that any bot that has an expected score over 90% and PBI of -5% or worse is trashing your rating. --David Alves
Here's a better candidate:
dans.Cinnamon_1.2 74.2 2 9-3-2004:18:22 86.4 -12.2Actual rating difference: 493.7
Ouch! --David Alves
(edit conflict) Err I think I misread the PBI of Virgin as the PBI of Aurora. Kakuru, Cinnamon, Predator, BiggerDeath? are all really big problems, though. Around 70, 80 or so expected and PBIs through the roof. Most importantly, there's no reason for a bot historically as rock solid as DT to be underperforming to any of them. Nor is that loss to Smoke encouraging :p -- Kuuran
What happened here:
radnor.[RamRod 1]?.0 32.0 4 9-3-2004:18:51 79.1 -47.0
It's over 4 battles, so isn't a fluke. Something wierd must have happened... -- Tango
I think it's a dynamic distance problem - from the name of the bot I think I'm not running away from the bot because I only select from distances I have sufficient results from - It's a simple fix - maybe tomorrow. -- Paul
I would guess that one bot is dragging down your rating quite a lot. I'd fix it ASAP, it could be the difference between 1999.9 and 2000. ;-) -- Tango
It also seems like virtually every pm in the rumble has DT's number. -- Kuuran
good old ramrod. i know exactly why it's working so well against sandbox and musashi. but i'm not about to tell. you can figure it out yourselves pretty easily anyway. new radnor bot similar to ramrod (but a lot better) coming out soon to draw down so more ratings! --andrew
Hi there - I'm glad to see you all are doing a grand job - ratings are gradally moving higher. I'm also glad to see DT still gives a few headaches to the top bots I'm particularly pleased with its ranking in the PL. I'm still not in a position to do anything new but recently I've found myself thinking of new ideas and wanting to test them out - perhaps after Christmas I'll be back. -- Paul Evans
And I'm glad to know you still visit in on us! And of course to hear that you have started getting those ideas... Given enough time they will force you back. =) -- PEZ
What is the state of play with DT against the top bots - I can't believe the ratings are a true reflection of it's abilities - the state of the art must have progressed. -- Paul Evans
Great to hear from you again! I suspect DT could reach the top simply by optimising (special casing) it's strategy against headOn guns. The state of the art these days is WaveSurfing, it excels in crushing simple guns (99.9% scores) and fooling most GF guns. Fyi, Shadow's current version beats DT by 52% over 1000 rounds. -- ABC
Of course the rating is a true reflection of its abilities. At least it's the reflection we have agreed on to use. If you find it hard to interpret ELO score figures (hehe!) check out this table instead: http://rumble.robowiki.net/servlet/PremierLeague?game=roborumble&table=2 it shows the raw percentage average DT gets against the full range of RR bots. It also shows that DT is strong against the strong. It usually fights with Shadow for the PL crown. -- PEZ
I turn off the flattener if all the enemy bullets fall in the same GF interval, I think it qualifies as special casing. I'm yet to make it more dynamic, my idea is to somehow detect the enemy's learning speed and adjust the flattening/dodging behaviour. -- ABC
DT is not a true WaveSurfer as I understand it - From memory it attempts to be hit equally across all guess Factors - it has a similar effect to wave surfing but not quite as efficient. On the other hand it will not fall victim to the first anti wave surfer gun. Is 52% the best that can be done to DT over 1000 rounds. -- Paul Evans
It sounds like only the 'flattening' part of wavesurfing. The 'other' part (what is that called anyway?) would make it a true wavesurfer, wouldn't it? --Vic
My gun is relatively weak against DT's movement, the best I ever scored (in 1k rounds) was 54%-56% a few versions ago, but that version ranked lower in the rumble. I believe Shadow would score close to 60% with PEZ' gun. DT's movement is probably more like an adaptative random movement. Anti wave surfer gun? Mine does pretty well against most of them... ;) -- ABC
Please test what Shadow scores against DT with my gun! In any case we were talking about state of the art above. I think the current DT is behind in both movement and targeting. The state of the art is harder to pinpoint in targeting though. Both carefully selected segmentations on top of a simple FloodMini style gun and Shadow's monster PM/stat hybrid seems to work. Shadow both has the RRGunChallenge crown. That might be it's anti-wave-surfer qualities, it's only a one point lead and the number of wave surfers are 15 or so. But since the RR is what counts I would say the Shadow gun is the most state-of-the-art. Though I'm not rocket scientist enough to understand what it's about. =) -- PEZ
I think my lead int the RRGC is probably because a PM gun is better against simple movers, 15 wave surfers are not enough to make a difference. Maybe an AWSGC is in order? :) Anyway, your gun is way ahead of mine in both the TCs, and is state-of-the-art for sure. -- ABC
I disagree. If a gun is best in the lab doesn't count. The real world is what counts. -- PEZ
Clarification: As i started out by stating I think my style of gun is too state-of-the-art. Just not as state-of-the-art as your gun. -- PEZ
More reason to come back, there is no way you should ever see this.
1st: jekl.DarkHallow 84878 27450 5490 45845 6092 0 0 550 451 0 2nd: pe.SandboxDT 3.02 71009 22550 4510 39439 4509 0 0 452 549 0
Well I've been active for the past week anyway... before that, nothing since my YALT/JALT frenzy in March I think. I feel obligated to tie up a few loose ends... fix RobocodeGL and become #1 in 1-v-1. ;-) --David Alves
Well, i was away too for two monthes, only returned last week also... And also i wanna that crown! :) -- Axe
I don't care about that crown all that much these days. But outranking the soon ancient RaikoMX is so hard that it almost drives me nuts! Or if it already has driven me nuts... Maybe if I ever succeed with that I will shift focus and join you crown contenders. -- PEZ
57.99% 1st: pez.rumble.CassiusClay 1.9.9.06 86750 30350 6070 44105 6224 0 0 608 393 2nd: pe.SandboxDT 3.02 62857 19650 3930 35545 3732 0 0 394 607-- PEZ
It's just a scratch - I can still fight. -- Paul
BLACK KNIGHT: Come here! ARTHUR: What are you going to do, bleed on me?-- JohnDoe
Latest CC vs DT 3.02:
60.917% 1st: pez.rumble.CassiusClay 188.8.131.52m 91521 33200 6640 44874 6807 0 0 665 336 2nd: pe.SandboxDT 3.02 58718 16800 3360 35364 3193 0 0 339 664Sweeet!
That's nice! Not as good but decent I guess:
57.105% 1st: pulsar.PulsarMax 0.8 86509 29900 5980 44344 6280 4 0 599 402 0 2nd: pe.SandboxDT 3.02 64981 20100 4020 37062 3798 0 0 404 598 0-- Pulsar
62.8% 1st: pez.rumble.CassiusClay 184.108.40.206n 93158 34400 6880 44941 6936 1 0 691 311 2nd: pe.SandboxDT 3.02 55069 15550 3110 33528 2881 0 0 315 688-- PEZ
64.1% 1st: pez.rumble.CassiusClay 220.127.116.11z 103467 36200 7240 51769 8258 0 0 725 276 2nd: pe.SandboxDT 3.02 57888 13800 2760 38343 2984 0 0 277 724Yes, you are reading correctlty, that's a 72.5% survival for CC. =)
I can't help but notice that 3.02 has a tendency to die in some melees, especially against a group of SittingDucks?. Good ole null pointer exceptions ;)
I certainly can not help noticing this, but 3.02 never works against my robots. I tried it with sample.Fire and it worked fine but there is this null pointer exception after reading in the data and it is disabled every round I try with it. Maybe you could fix it up and let my try beating it :). (The robot I tried against it has not been released but it also does not work against my ScanFire.) -- Kinsen
It occurs in melee and 1-vs-1, and I don't think that it is the mentioned bug. -- Kinsen
I wish that it would beat my robots... it does not do anything besides turn its radar 360 degrees. -- Kinsen
Interesting, I tried it again, and it worked. However, it did not work before although I am at a different location that where I had usually tried it, but I think that I had tried it here before... so I am really mystified about why it did not work for so long. -- Kinsen
Here is the output:
pe.SandboxDT 3.02: Exception: java.lang.NullPointerException java.lang.NullPointerException at pe.a.l.<init>(Unknown Source) at pe.a.i.int(Unknown Source) at pe.a.i.else(Unknown Source) at pe.SandboxDT.run(Unknown Source) at robocode.peer.RobotPeer.run(RobotPeer.java:633) at java.lang.Thread.run(Unknown Source)-- Kinsen
I downloaded DT, just for the fun of it, even though the source seems to be unavailable. However, when I run him in MeleeBattles?, sometimes if he destroys the third-to-last bot and the other bot is out of his radar, DT will just roll to a stop and get stuck. Hence other bots will beat him handily in Melee when they shouldn't. Does this happen with anyone else's version? --Pfvicm
Just for the heck of it:
67.6% jk.mega.DrussGT 1.1.4 101105 37400 7480 48222 8003 0 0 748 252 0 pe.SandboxDT 3.02 48361 12600 2520 30808 2433 0 0 252 748 0 74.8% survival;-) -- Skilgannon